轉到網站首頁
轉為中文步驟：
1、請用電腦端360瀏覽器打開本頁地址，如您電腦未安裝360瀏覽器，請點這里下載;
2、點擊360瀏覽器右上角的翻譯插件，如右圖紅圈中所示:
3、點擊所彈出窗口里的右下角的按鈕 “翻譯當前網頁”;
4、彈窗提示翻譯完畢后關閉彈窗即可；
MAX232, MAX232I  
DUAL EIA-232 DRIVER/RECEIVER  
SLLS047H – FEBRUARY 1989 – REVISED FEBRUARY 2002  
D, DW, N, OR NS PACKAGE  
(TOP VIEW)  
Operates With Single 5-V Power Supply  
LinBiCMOS Process Technology  
Two Drivers and Two Receivers  
±30-V Input Levels  
V
C1+  
1
2
3
4
5
6
7
8
16  
15  
14  
CC  
GND  
V
S+  
T1OUT  
C1–  
C2+  
C2–  
Low Supply Current . . . 8 mA Typical  
13 R1IN  
Meets or Exceeds TIA/EIA-232-F and ITU  
Recommendation V.28  
12 R1OUT  
11  
10  
9
T1IN  
V
S–  
Designed to be Interchangeable With  
Maxim MAX232  
T2IN  
T2OUT  
R2IN  
R2OUT  
ESD Protection Exceeds JESD 22  
– 2000-V Human-Body Model (A114-A)  
Applications  
TIA/EIA-232-F  
Battery-Powered Systems  
Terminals  
Modems  
Computers  
Package Options Include Plastic  
Small-Outline (D, DW, NS) Packages and  
Standard Plastic (N) DIPs  
description  
The MAX232 device is a dual driver/receiver that includes a capacitive voltage generator to supply EIA-232  
voltage levels from a single 5-V supply. Each receiver converts EIA-232 inputs to 5-V TTL/CMOS levels. These  
receivers have a typical threshold of 1.3 V and a typical hysteresis of 0.5 V, and can accept ±30-V inputs. Each  
driver converts TTL/CMOS input levels into EIA-232 levels. The driver, receiver, and voltage-generator  
functions are available as cells in the Texas Instruments LinASIC library.  
The MAX232 is characterized for operation from 0°C to 70°C. The MAX232I is characterized for operation from  
–40°C to 85°C.  
AVAILABLE OPTIONS  
PACKAGED DEVICES  
SMALL  
OUTLINE  
(D, NS)  
SMALL  
OUTLINE  
(DW)  
T
A
PLASTIC DIP  
(N)  
MAX232D  
MAX232NS  
0°C to 70°C  
MAX232DW  
MAX232IDW  
MAX232N  
MAX232IN  
–40°C to 85°C  
MAX232ID  
The D and DW packages are available taped and reeled by adding an R to the part number  
(i.e., MAX232DR). The NS package is only available taped and reeled.  
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of  
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.  
LinASIC and LinBiCMOS are trademarks of Texas Instruments.  
Copyright 2002, Texas Instruments Incorporated  
PRODUCTION DATA information is current as of publication date.  
Products conform to specifications per the terms of Texas Instruments  
standard warranty. Production processing does not necessarily include  
testing of all parameters.  
1
POST OFFICE BOX 655303 ? DALLAS, TEXAS 75265  
MAX232, MAX232I  
DUAL EIA-232 DRIVER/RECEIVER  
SLLS047H – FEBRUARY 1989 – REVISED FEBRUARY 2002  
?
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)  
Input supply voltage range, V  
Positive output supply voltage range, V  
Negative output supply voltage range, V  
(see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.3 V to 6 V  
CC  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.3 V to –15 V  
– 0.3 V to 15 V  
S+  
S–  
CC  
Input voltage range, V : Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.3 V to V  
+ 0.3 V  
I
CC  
Receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±30 V  
Output voltage range, V : T1OUT, T2OUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V –0.3 V to V + 0.3 V  
O
S–  
S+  
CC  
R1OUT, R2OUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.3 V to V  
+ 0.3 V  
Short-circuit duration: T1OUT, T2OUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Unlimited  
Package thermal impedance, θ (see Note 2): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73°C/W  
JA  
DW package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57°C/W  
N package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67°C/W  
NS package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64°C/W  
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C  
Storage temperature range, T  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to 150°C  
stg  
?
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and  
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not  
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.  
NOTE 1: All voltage values are with respect to network ground terminal.  
2. The package thermal impedance is calculated in accordance with JESD 51-7.  
recommended operating conditions  
MIN NOM  
MAX  
UNIT  
V
V
V
Supply voltage  
4.5  
2
5
5.5  
V
V
V
V
CC  
IH  
IL  
High-level input voltage (T1IN,T2IN)  
Low-level input voltage (T1IN, T2IN)  
Receiver input voltage  
0.8  
±30  
70  
R1IN, R2IN  
MAX232  
MAX232I  
0
T
A
Operating free-air temperature  
°C  
–40  
85  
2
POST OFFICE BOX 655303 ? DALLAS, TEXAS 75265  
MAX232, MAX232I  
DUAL EIA-232 DRIVER/RECEIVER  
SLLS047H – FEBRUARY 1989 – REVISED FEBRUARY 2002  
electrical characteristics over recommended ranges of supply voltage and operating free-air  
temperature range (unless otherwise noted)  
?
PARAMETER  
TEST CONDITIONS  
= 3 k? to GND  
MIN TYP  
MAX  
UNIT  
T1OUT, T2OUT  
R1OUT, R2OUT  
T1OUT, T2OUT  
R1OUT, R2OUT  
R
5
7
L
V
V
High-level output voltage  
V
OH  
I
= –1 mA  
3.5  
OH  
R
= 3 k? to GND  
= 3.2 mA  
–7  
–5  
L
?
V
Low-level output voltage  
OL  
I
0.4  
OL  
Receiver positive-going input  
threshold voltage  
VIT+  
R1IN, R2IN  
R1IN, R2IN  
V
CC  
V
CC  
= 5 V,  
= 5 V,  
T
= 25°C  
= 25°C  
1.7  
1.2  
2.4  
V
V
A
Receiver negative-going input  
threshold voltage  
VIT–  
T
A
0.8  
Vhys Input hysteresis voltage  
R1IN, R2IN  
V
V
V
V
= 5 V  
= 5,  
0.2  
3
0.5  
5
1
7
V
k?  
?
CC  
CC  
S+  
ri  
Receiver input resistance  
Output resistance  
R1IN, R2IN  
T
= 25°C  
= ± 2 V  
= 0  
A
ro  
T1OUT, T2OUT  
T1OUT, T2OUT  
T1IN, T2IN  
= V  
S–  
= 5.5 V,  
= 0,  
V
300  
O
O
§
IOS  
Short-circuit output current  
Short-circuit input current  
V
±10  
mA  
μA  
CC  
IIS  
V = 0  
I
200  
10  
V
T
A
= 5.5 V,  
All outputs open,  
CC  
= 25°C  
ICC  
Supply current  
8
mA  
?
?
All typical values are at V  
= 5 V, T = 25°C.  
A
CC  
The algebraic convention, in which the least positive (most negative) value is designated minimum, is used in this data sheet for logic voltage  
levels only.  
§
Not more than one output should be shorted at a time.  
switching characteristics, V  
= 5 V, T = 25°C  
A
CC  
PARAMETER  
TEST CONDITIONS  
See Figure 1  
MIN  
TYP  
500  
500  
MAX  
UNIT  
ns  
t
t
Receiver propagation delay time, low- to high-level output  
Receiver propagation delay time, high- to low-level output  
PLH(R)  
See Figure 1  
ns  
PHL(R)  
R
= 3 k? to 7 k?,  
L
SR  
Driver slew rate  
30  
V/μs  
V/μs  
See Figure 2  
SR(tr)  
Driver transition region slew rate  
See Figure 3  
3
3
POST OFFICE BOX 655303 ? DALLAS, TEXAS 75265  
MAX232, MAX232I  
DUAL EIA-232 DRIVER/RECEIVER  
SLLS047H – FEBRUARY 1989 – REVISED FEBRUARY 2002  
PARAMETER MEASUREMENT INFORMATION  
V
CC  
R
= 1.3 k?  
L
R1OUT  
or  
R2OUT  
R1IN  
or  
R2IN  
See Note C  
Pulse  
Generator  
(see Note A)  
C
= 50 pF  
L
(see Note B)  
TEST CIRCUIT  
≤ 10 ns  
≤ 10 ns  
3 V  
0 V  
90%  
50%  
90%  
50%  
Input  
10%  
10%  
500 ns  
t
PLH  
t
PHL  
V
V
OH  
Output  
1.5 V  
1.5 V  
WAVEFORMS  
NOTES: A. The pulse generator has the following characteristics: Z = 50 ?, duty cycle ≤ 50%.  
OL  
O
B.  
C includes probe and jig capacitance.  
L
C. All diodes are 1N3064 or equivalent.  
Figure 1. Receiver Test Circuit and Waveforms for t  
and t  
Measurements  
PHL  
PLH  
4
POST OFFICE BOX 655303 ? DALLAS, TEXAS 75265  
MAX232, MAX232I  
DUAL EIA-232 DRIVER/RECEIVER  
SLLS047H – FEBRUARY 1989 – REVISED FEBRUARY 2002  
PARAMETER MEASUREMENT INFORMATION  
T1IN or T2IN  
T1OUT or T2OUT  
Pulse  
Generator  
(see Note A)  
EIA-232 Output  
C
= 10 pF  
L
R
L
(see Note B)  
TEST CIRCUIT  
≤ 10 ns  
≤ 10 ns  
3 V  
0 V  
90%  
50%  
90%  
50%  
Input  
10%  
10%  
5 μs  
t
PLH  
90%  
t
PHL  
V
OH  
90%  
Output  
10%  
10%  
V
OL  
t
TLH  
)
t
THL  
0.8 (V  
t
–V  
)
0.8 (V –V  
OH OL  
OL OH  
THL  
SR  
or  
t
TLH  
WAVEFORMS  
NOTES: A. The pulse generator has the following characteristics: Z = 50 ?, duty cycle ≤ 50%.  
O
B.  
C includes probe and jig capacitance.  
L
Figure 2. Driver Test Circuit and Waveforms for t  
and t  
Measurements (5-μs input)  
PHL  
PLH  
Pulse  
Generator  
(see Note A)  
EIA-232 Output  
3 k?  
C
= 2.5 nF  
L
TEST CIRCUIT  
≤ 10 ns  
≤ 10 ns  
Input  
90%  
1.5 V  
90%  
1.5 V  
10%  
10%  
20 μs  
t
TLH  
t
THL  
3 V  
V
V
OH  
3 V  
Output  
–3 V  
–3 V  
OL  
6 V  
or t  
SR  
t
THL  
TLH  
WAVEFORMS  
NOTE A: The pulse generator has the following characteristics: Z = 50 ?, duty cycle ≤ 50%.  
O
Figure 3. Test Circuit and Waveforms for t  
and t  
Measurements (20-μs input)  
THL  
TLH  
5
POST OFFICE BOX 655303 ? DALLAS, TEXAS 75265  
MAX232, MAX232I  
DUAL EIA-232 DRIVER/RECEIVER  
SLLS047H – FEBRUARY 1989 – REVISED FEBRUARY 2002  
APPLICATION INFORMATION  
5 V  
16  
1 μF  
8.5 V  
– 8.5 V  
V
CC  
1
3
4
5
2
6
C1+  
C1–  
C2+  
C2–  
V
S+  
1 μF  
1 μF  
V
S–  
1 μF  
+
14  
11  
EIA-232 Output  
EIA-232 Output  
EIA-232 Input  
EIA-232 Input  
From CMOS or TTL  
To CMOS or TTL  
10  
12  
7
13  
8
9
0 V  
15  
GND  
Figure 4. Typical Operating Circuit  
6
POST OFFICE BOX 655303 ? DALLAS, TEXAS 75265  
IMPORTANT NOTICE  
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,  
enhancements, improvements, and other changes to its products and services at any time and to discontinue  
any product or service without notice. Customers should obtain the latest relevant information before placing  
orders and should verify that such information is current and complete. All products are sold subject to TI’s terms  
and conditions of sale supplied at the time of order acknowledgment.  
TI warrants performance of its hardware products to the specifications applicable at the time of sale in  
accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI  
deems necessary to support this warranty. Except where mandated by government requirements, testing of all  
parameters of each product is not necessarily performed.  
TI assumes no liability for applications assistance or customer product design. Customers are responsible for  
their products and applications using TI components. To minimize the risks associated with customer products  
and applications, customers should provide adequate design and operating safeguards.  
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,  
copyright, maskworkright, orotherTIintellectualpropertyrightrelatingtoanycombination, machine, orprocess  
in which TI products or services are used. Information published by TI regarding third–party products or services  
does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.  
Use of such information may require a license from a third party under the patents or other intellectual property  
of the third party, or a license from TI under the patents or other intellectual property of TI.  
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without  
alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction  
of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for  
such altered documentation.  
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that  
product or service voids all express and any implied warranties for the associated TI product or service and  
is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.  
Mailing Address:  
Texas Instruments  
Post Office Box 655303  
Dallas, Texas 75265  
Copyright 2002, Texas Instruments Incorporated